Erase and reset must run only once during flashing.
This prevents a situation, where the next flashed image erases the
previous one.

Upstream PR: zephyrproject-rtos/zephyr#73900

Signed-off-by: Rafał Kuźnia <[email protected]>

Adjustment LFXO CLOAD value. New value is a resualt of DK's characterization.

Signed-off-by: Karol Lisak <[email protected]>

In case of thread failure, fix the registrations by properly managing
the synchronization i.e. use conditional wait only if thread is being
initialized or will be initialized, else check for success or failure
without waiting for conditional variables.

Fixes #73523.

Upstream PR: zephyrproject-rtos/zephyr#73524

Signed-off-by: Chaitanya Tata <[email protected]>

Increasing the adv latency range to the minimum valid
ReceiveDelay value, 10ms. 4ms might be small for some
target systems.

Signed-off-by: alperen sener <[email protected]>
(cherry picked from commit 0b220dd)
Signed-off-by: alperen sener <[email protected]>

APIs for enabling and disabling the scanner may take larger time than
expected and scheduling of the lpn state machine is affected by it.
Since these type of latencies are factored into timeouts and scheduling
times, we need to call scan enable/disable APIs after scheduling the
next event time for LPN state machine to be more accurate.

Signed-off-by: alperen sener <[email protected]>
(cherry picked from commit c93859c)
Signed-off-by: alperen sener <[email protected]>

Fixes issue where PB GATT Server will drop
advertising device name if optional provisioning
URI is not provided.

Signed-off-by: Anders Storrø <[email protected]>
(cherry picked from commit cee8080)
Signed-off-by: alperen sener <[email protected]>

…ection

Adds a tag to the sysbuild application configuration section so it
can be referenced in other documentation

Upstream PR: zephyrproject-rtos/zephyr#74002

Signed-off-by: Jamie McCrae <[email protected]>

Enable execution of ADC driver tests on nrf54l15.
Overlay file for nrf54l15 already exists.

Signed-off-by: Sebastian Głąb <[email protected]>
(cherry picked from commit 7a5f2ad)

kconfig_soc_root was mistakenly set to value of BOARD_ROOT.
Fix this by correctly set kconfig_soc_root to the value of SOC_ROOT.

Upstream PR: zephyrproject-rtos/zephyr#74057

Signed-off-by: Torsten Rasmussen <[email protected]>
(cherry picked from commit e7aef7ffb9b197efd914fe402621b63d28551f9e)

For 2.4GHz and 6GHz bands, while counting the channels in configured
range, start of the range is being counted twice. Correct this
by advancing the index by 1 while counting channels in range.

Upstream PR: zephyrproject-rtos/zephyr#74063

Signed-off-by: Ravi Dondaputi <[email protected]>

Legacy shim takes less flash so it should be a first choice on cores
with less code memory (like RISCV cores on nrf54h20). Adding new
instances support to the legacy shim.

Signed-off-by: Krzysztof Chruściński <[email protected]>
(cherry picked from commit d07b13d)

d599e2b removed early return from sys_clock_timeout_handler if
current counter value is less than cc_val. It seems that this return is
needed as after the removal some stress tests which were using system
timers heavily started to hang.

Signed-off-by: Krzysztof Chruściński <[email protected]>
(cherry picked from commit af3c8b9)

As the Infocenter will soon be taken offline, updating
links to point to TechDocs.

Upstream PR: zephyrproject-rtos/zephyr#73693

Signed-off-by: Pekka Niskanen <[email protected]>
(cherry picked from commit ce1ade30b61d889cbc595ae84e419c34d4ab419f)

…build list

nrf-squash! [nrf noup] scripts: west: build: Use sysbuild by default if in NCS dir

Adds the example NCS project to the list of repos that should
build using sysbuild by default

Signed-off-by: Jamie McCrae <[email protected]>

…e.yaml

Set the bootloader choice for the
sample.modules.canopennode.program_download test case in the sample.yaml
file instead of sysbuild.conf. The reason for this change is to avoid
building MCUboot by default when using the --sysbuild option, as it may
not be compatible with all platforms. This is currently causing issues
on platforms like nRF54H20 where sysbuild is always used.

Upstream PR: zephyrproject-rtos/zephyr#74101

Signed-off-by: Gerard Marull-Paretas <[email protected]>
(cherry picked from commit 4ca5c66b34e973a83f909d06ffde857e90f57aa6)

When TF-M is used, zephyr must use a different interrupt line for
GRTC.

Upstream PR: zephyrproject-rtos/zephyr#74084

Signed-off-by: Vidar Lillebø <[email protected]>
(cherry picked from commit ff95bb4af6923553c545da9374ed665bf2ec471d)

… validation

Fix missing validation of Connection Update Ind PDU. Ignore
invalid connection update parameters and force a silent
local connection termination.

Signed-off-by: Vinayak Kariappa Chettimada <[email protected]>
(cherry picked from commit 4b6d3f1)
Signed-off-by: Vinayak Kariappa Chettimada <[email protected]>

…ntation

Refactor reused function in BT_CTLR_LE_ENC feature.

Signed-off-by: Vinayak Kariappa Chettimada <[email protected]>
(cherry picked from commit fe205a5)
Signed-off-by: Vinayak Kariappa Chettimada <[email protected]>

…eeded

A Host shall consider any error code that it does not
explicitly understand equivalent to the error code
Unspecified Error (0x1F).

Signed-off-by: Vinayak Kariappa Chettimada <[email protected]>
(cherry picked from commit 78466c8)
Signed-off-by: Vinayak Kariappa Chettimada <[email protected]>

Add unit tests to cover explicit LLCP error code check and
cover the same in the Controller implementation.

Signed-off-by: Vinayak Kariappa Chettimada <[email protected]>
(cherry picked from commit d6f2bc9)
Signed-off-by: Vinayak Kariappa Chettimada <[email protected]>

…on changes

If the new encryption state is the same as the old one, there's no point in
doing additional processing or callbacks. Simply log a warning and ignore
the HCI event in such a case.

Signed-off-by: Johan Hedberg <[email protected]>
(cherry picked from commit bf363d7)
Signed-off-by: Vinayak Kariappa [email protected] <[email protected]>

Adding nordic,pm-ext-flash chosen pointing to mx25r64 as external flash
for partition manager.

Signed-off-by: Dominik Ermel <[email protected]>

Add nrf5340dk_nrf5340 board specific configuration that allows
for APP and NET updates.

NCSDK-16882

Signed-off-by: Dominik Ermel <[email protected]>